Water Treatment

The Paramount Clear O3 uses a unique method of introducing Ozone into the pool water. Being installed on the suction side of the pump, the restricted Ozone flow is thoroughly mixed by the pump impellor, and introduced into the filter in microscopic bubbles. This give more effective oxidizing efficiency due to the longer contact time with the pool water. As with all ozone systems, it must be backed up with sanitizer residual in the pool. Clear O3 can be coupled with a trichlor feeder, or even a salt chlorinator if required.

Heating Systems

Raypak Gas Heating

Extend your swimming season with a Raypak gas heater. Using 21st century technology, a Raypak gas heater puts accurate temperature control at your finger tips, to ensure warmth whenever you need it. All Raypak heaters feature energy saving "hot surface" ignition, dual thermostat for pool and spa settings, digital temperature display, and optional remote thermostat. They are manufactured using high quality materials, are finished in baked enamel to withstand the toughest weather conditions, and carry a three year parts warranty to give you peace of mind.

Evo Heat Pumps

Evo Electric Heat Pumps give you the ultimate in performance with up to 500% efficiency. They are the ideal choice for keen swimmers looking to maintain constant temperatures throughout the swimming season.

Available in a range of sizes, and with stainless steel cabinets, they are ideally suited for pools in any location from seaside to the outback.

Spa Blowers

Spa King Loop Charged Injected Blowers

The totally new innovative approach used in this blower design, sets it apart from other "vacuum cleaner" type blowers. The Spa King blower has separate motor-cooling air flow channels, keeping the spa airflow away from the motor. This prevents chlorinated vapours from causing corrosion of electrical components, giving you long, trouble-free service. Available in several different models, Spa King blowers can be used for domestic spas, and even light commercial applications.

Spa King Burial Blowers

Produced to the same specifications as the Loop Charged Injected models, Spa King have designed a special range of models to use where noise level is critical. The blower motor can be buried in the ground, or in sand inside a drum, so that the noise of the motor is almost completely eliminated. Australian designed and manufactured, all Spa-King blowers are electrically approved both here and overseas.

Dependable Valves

Jandy Neverlube Valves

Setting the industry standard, Jandy valves are the worlds first Neverlube valves. Requiring no lubrication, the Jandy valve seals are made from special proprietary material that is guaranteed never to leak or break for the life of the valve. The valve design allows maximum flow with minimum pressure loss. They can be operated manually, or easily motorized for automatic operation, because of the new low friction seals.

Jandy Swing Check Valves

The new Jandy swing check valves feature a spring-loaded seal plate for positive back-flow prevention. The stainless steel pin hinge enables the plate to swing clear of the water flow, giving maximum flow with minimum pressure loss. With a clear cover for easy inspection and serviceability, in sizes of 40mm and 50mm, and in straight or 90degree format, there is a model to suit most pool and spa applications.

Jandy Valve Actuators

The fully automatic Jandy Valve Actuator offers a convenient alternative to manually operated valves, making even the most complex plumbing system, simple to operate.

Made specifically for the Jandy Never-Lube range of valves, they are 24 volt operated, and can be coupled to the Aqualink or Spa-Link control systems, to automate Pool / Spa operation. They can also be used where any automatic flow control is required, such as water-falls, water features, solar systems etc.

Pool-Water Products Versa-Valve

Incorporating two - three way valves coupled together with a single actuator, the Versa-Valve enables the automatic control of pool to spa water flow in a convenient and economical plumbing form. Available in two formats - with or without by-pass plumbing - Versa Valve can be made with 40mm or 50mm Jandy “Neverlube” valves.

Return To Top